Epson WorkForce Pro WF-M4119 Users Guide - Page 118
Paper is loaded incorrectly., The paper path is smeared.
View all Epson WorkForce Pro WF-M4119 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Solving Problems > Print Quality is Poor Paper is loaded incorrectly. Solutions When horizontal banding (perpendicular to the printing direction) appears, or the top or bottom of the paper is smeared, load paper in the correct direction and slide the edge guides to the edges of the paper. & "Loading Paper" on page 28 The paper path is smeared. Solutions When vertical banding (horizontal to the printing direction) appears, or the paper is smeared, clean the paper path. & "Cleaning the Paper Path for Ink Smears" on page 72 The paper is curled. Solutions Place the paper on a flat surface to check if it is curled. If it is, flatten it. The print head is rubbing the surface of the paper. Solutions When printing on thick paper, the print head is close to the printing surface and the paper may be scuffed. In this case, enable the reduce scuff setting. If you enable this setting, print quality may decline or printing may slow down. ❏ Control panel Select Settings > General Settings > Printer Settings, and then enable Thick Paper. ❏ Windows Click Extended Settings on the printer driver's Maintenance tab, and then select Thick Paper and Envelopes. ❏ Mac OS Select System Preferences from the Apple menu > Printers & Scanners (or Print & Scan, Print & Fax), and then select the printer. Click Options & Supplies > Options (or Driver). Select On as theThick paper and envelopes setting. The back of the paper was printed before the side that had already been printed was dry. Solutions When performing manual 2-sided printing, make sure that the ink is completely dry before reloading the paper. When printing using automatic 2-sided printing, the print density is too high and the drying time is too short. Solutions When using the automatic 2-sided printing feature and printing high density data such as images and graphs, set the print density to lower and the drying time to longer. & "Printing on 2-Sides" on page 39 118