Epson TM-T20II UB-R04 Technical Reference Guide - Page 43

Settings, Basic Information, TCP/IP, Bonjour, Time Setting, Timeout, ePOS-Print

Get Epson TM-T20II PDF manuals and user guides View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Chapter 3 Application Development Information Settings Select from the menu list on the left to check or configure the settings. Enable the time server when using a certificate. Otherwise, the printer's Stored Date/Time may not be set correctly and the wireless LAN may be unavailable. If this happens, enable the time server, or initialize the Stored Date/Time from one of the following: ∗ EpsonNet Config ∗ EpsonNet Config (Web Version) ∗ Wireless Communication Setting Initializing Mode You can check the printer's Stored Date/Time from the dynamic status sheet. Information menu You can check the settings as shown in the table below. Menu Settings Basic Information Administrator Name, Location, interface Card Model Name, MAC Address, Hardware Version, Software Version, Model Name, Communication Standard, Network Mode, SSID, Channel, Transmission Rate, Access Point MAC Address, Signal Condition, Printer Status IP Address Settings (Acquiring the IP Address, IP Address, Subnet Mask, IPv4 Address Default Gateway) 3 Set Using Automatic Private IP Addressing (APIPA) TCP/IP DNS/DDNS DNS Server Addresses (IPv4) Settings (Acquire DNS Server Address Automatically, DNS Server Addresses) Domain Name Setting (Acquire Domain Name Automatically, Fully Qualified Domain Name, Register the Network Interface's Address to DNS Server) SNMP Community (Read Only) IP Trap (Trap1/2, Address, Community) Bonjour Bonjour (Disable/Enable) Bonjour Name, Bonjour Printer Name, Location Time Setting Use Time Server Time Server Address, Update Interval, Time Server Status Timeout Print (LPR, RAW (Port9100)) ePOS-Print Version, ePOS-Print (Disable/Enable), Device ID 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Chapter 3
Application Development Information
43
3
Settings
Select from the menu list on the left to check or configure the settings.
Information menu
You can check the settings as shown in the table below.
Enable the time server when using a certificate. Otherwise, the printer's Stored Date/Time may
not be set correctly and the wireless LAN may be unavailable. If this happens, enable the time
server, or initialize the Stored Date/Time from one of the following:
∗
EpsonNet Config
∗
EpsonNet Config (Web Version)
∗
Wireless Communication Setting Initializing Mode
You can check the printer's Stored Date/Time from the dynamic status sheet.
Menu
Settings
Basic Information
Administrator Name, Location, interface Card Model Name, MAC Address,
Hardware Version, Software Version, Model Name, Communication
Standard, Network Mode, SSID, Channel, Transmission Rate, Access Point
MAC Address, Signal Condition, Printer Status
TCP/IP
IPv4 Address
IP Address Settings (Acquiring the IP Address, IP Address, Subnet Mask,
Default Gateway)
Set Using Automatic Private IP Addressing (APIPA)
DNS/DDNS
DNS Server Addresses (IPv4) Settings (Acquire DNS Server Address
Automatically, DNS Server Addresses)
Domain Name Setting (Acquire Domain Name Automatically, Fully
Qualified Domain Name, Register the Network Interface’s Address to DNS
Server)
SNMP
Community (Read Only)
IP Trap (Trap1/2, Address, Community)
Bonjour
Bonjour (Disable/Enable)
Bonjour Name, Bonjour Printer Name, Location
Time Setting
Use Time Server
Time Server Address, Update Interval, Time Server Status
Timeout
Print (LPR, RAW (Port9100))
ePOS-Print
Version, ePOS-Print (Disable/Enable), Device ID