Epson TM-T20II UB-R04 Technical Reference Guide - Page 33

Connection from the Setting Computer, Setting of the UB-R04

Get Epson TM-T20II PDF manuals and user guides View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Chapter 2 Installation Connection from the Setting Computer Connect the setting computer to the access point by the wired LAN. The setting of the access point is set for the Dynamic Status Sheet. The setting items are as follows. As for the setting method of the setting computer, refer to the manual of the computer used. • SSID (Ex: EpsonNet) • IP Address (Ex: 192.168.192.2) (Don't set the same address as the IP Address of the printer to the setting computer and the access point. Example: If the IP Address is 192.168.192.168, the IP Address of the setting computer should be set to another number, such as 192.168.192.2. The same address (192.168.192.168) cannot be used.) • Channel (Ex: 11 ch) • Security setting (Ex: WPA2-PSK) • Passphrase (Ex: EpsonNet) 2 When you set up more than one TM printers equipped with wireless LAN interface, turn on only one printer. If more than one printer is turned on at the same time, the TM printer cannot be set up. At this stage, the TM printer can communicate with the setting computer. Setting of the UB-R04 Set up the UB-R04 according to the following steps. 1 Start up the EpsonNet Config of the setting computer. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Chapter 2
Installation
33
2
Connection from the Setting Computer
Connect the setting computer to the access point by the wired LAN. The setting of the access point is set for
the Dynamic Status Sheet. The setting items are as follows.
•
SSID (Ex: EpsonNet)
•
IP Address (Ex: 192.168.192.2)
(Don't set the same address as the IP Address of the printer to the setting computer and the access point.
Example: If the IP Address is 192.168.192.168, the IP Address of the setting computer should be set to
another number, such as 192.168.192.2. The same address (192.168.192.168) cannot be used.)
•
Channel (Ex: 11 ch)
•
Security setting (Ex: WPA2-PSK)
•
Passphrase (Ex: EpsonNet)
At this stage, the TM printer can communicate with the setting computer.
Setting of the UB-R04
Set up the UB-R04 according to the following steps.
1
Start up the EpsonNet Config of the setting computer.
As for the setting method of the setting computer, refer to the manual of the computer used.
When you set up more than one TM printers equipped with wireless LAN interface, turn on only
one printer. If more than one printer is turned on at the same time, the TM printer cannot be set
up.