Epson TM-T20II UB-R04 Technical Reference Guide - Page 29

Confirming the Operation

Get Epson TM-T20II PDF manuals and user guides View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Chapter 2 Installation Confirming the Operation Confirm that the printer equipped with the UB-R04 is connected to the network. There are three confirmation methods. • Confirm using a Web browser. • Conform using EpsonNet Config. • Conform using the PING command from the command prompt. This section describes how to confirm using a Web browser. 1 Confirm that the network is running; then start up the computer of the network. 2 Start up the Web browser and enter the IP Address for the UB-R04 in the address bar. Address: http://(IP Address of the UB-R04)/ 3 The "EpsonNet Config" window is displayed. 2 If the EpsonNet Config (Web version) screen is not displayed, the network may not be set correctly. Connect a USB cable, and then check the settings again. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Chapter 2
Installation
29
2
Confirming the Operation
Confirm that the printer equipped with the UB-R04 is connected to the network. There are three
confirmation methods.
•
Confirm using a Web browser.
•
Conform using EpsonNet Config.
•
Conform using the PING command from the command prompt.
This section describes how to confirm using a Web browser.
1
Confirm that the network is running; then start up the computer of the network.
2
Start up the Web browser and enter the IP Address for the UB-R04 in the address bar.
Address: http://(IP Address of the UB-R04)/
3
The “EpsonNet Config” window is displayed.
If the EpsonNet Config (Web version) screen is not displayed, the network may not be set
correctly. Connect a USB cable, and then check the settings again.