Epson TM-T20II UB-R04 Technical Reference Guide - Page 41
Application Development Information, EpsonNet Config (Web Version) - print configuration
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 3 Application Development Information Application Development Information This chapter gives information useful for printer application development. EpsonNet Config (Web Version) EpsonNet Config (Web version) is a utility to configure the network and other settings on a web browser. (The screenshots used in this chapter were captured using Internet Explorer. If you are using another browser, the screenshots may differ from those of your browser, however, there is no difference in the setting items and procedures themselves.) Starting EpsonNet Config (Web Version) Follow the steps below to start up EpsonNet Config (Web version). 1 Start up a PC connected to the network. 2 Start up the web browser and enter the IP address for the UB-R04 in the address bar. Address: http://(IP Address of the UB-R04)/ 3 • For the IP address of the UB-R04, see the dynamic status sheet. To print the dynamic status sheet, see "Printing a Dynamic Status Sheet" on page 31. • A user name and a password will be required on the authentication screen. Enter "epson" for both the user name and the password. You can change the password with [Password] in the Optional configuration menu. • In the initial setting, a warning message for authentication may appear when you access EpsonNet Config (Web version) from a browser. 41