Epson TM-T20II UB-R04 Technical Reference Guide - Page 27

Setting of the UB-R04 - driver download

Get Epson TM-T20II PDF manuals and user guides View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Chapter 2 Installation Installing the EpsonNet Config to the computer used for setting Download the EpsonNet Config and install it in the computer, following the on-screen instructions. • Use the latest version of EpsonNet Config. You may not be able to use some functions if you are using an older version. • For details on using the EpsonNet Config, install it, and then see the EpsonNet Config manual (operation guide) or the EpsonNet Config online help. Setting of the UB-R04 Set the UB-R04 according to the following steps. 1 Turn the power supply of the TM printer off, connect the computer to the USB connector (parameter setting) with the USB cable. 2 Set paper in the TM printer and turn it on. When the first connecting to the setting computer, the "Installing device driver software" message is 2 displayed, then the hardware setup is started automatically. Wait about one or two minutes until the setting is completed. 3 Start up the EpsonNet Config in the computer for setting. 4 The "EpsonNet Config" window is displayed. Select the printer for setting and click the [Configuration] button. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Chapter 2
Installation
27
2
Installing the EpsonNet Config to the computer used for setting
Download the EpsonNet Config and install it in the computer, following the on-screen instructions.
Setting of the UB-R04
Set the UB-R04 according to the following steps.
1
Turn the power supply of the TM printer off, connect the computer to the USB
connector (parameter setting) with the USB cable.
2
Set paper in the TM printer and turn it on.
When the first connecting to the setting computer, the “Installing device driver software” message is
displayed, then the hardware setup is started automatically. Wait about one or two minutes until the
setting is completed.
3
Start up the EpsonNet Config in the computer for setting.
4
The “EpsonNet Config” window is displayed. Select the printer for setting and click
the [Configuration] button.
•
Use the latest version of EpsonNet Config. You may not be able to use some functions if you
are using an older version.
•
For details on using the EpsonNet Config, install it, and then see the EpsonNet Config manual
(operation guide) or the EpsonNet Config online help.