Epson TM-T20II UB-R04 Technical Reference Guide - Page 38

Changing of the Setting, Change Using a Web Browser

Get Epson TM-T20II PDF manuals and user guides View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Changing of the Setting There are three methods for changing the setting of the UB-R04 connected with the network. • Change the setting with a Web browser. Settings can be changed by a computer on the same network. • Change the setting using EpsonNet Config (USB connection). This method is similar to the initial setting procedure. It is suited for setting with other networks because the connection with the UB-R04 is not cut. • Change the setting using EpsonNet Config (By network). It is suited for changing the setting in the same network. Change Using a Web Browser Change the setting of the UB-R04 using a Web browser. It is suited for some changes in the same network. After changing the setting of the UB-R04, the TM printer should be reset. If the UB-R04 is set to another network, the connection will be cut. Change method 1 Start up the computer of the network. 2 Start up the Web browser and enter the IP Address set for the UB-R04 in the address bar. The "EpsonNet Config" window is displayed. Address: http://(IP Address of the UB-R04)/ 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
38
Changing of the Setting
There are three methods for changing the setting of the UB-R04 connected with the network.
•
Change the setting with a Web browser.
Settings can be changed by a computer on the same network.
•
Change the setting using EpsonNet Config (USB connection).
This method is similar to the initial setting procedure. It is suited for setting with other networks because
the connection with the UB-R04 is not cut.
•
Change the setting using EpsonNet Config (By network).
It is suited for changing the setting in the same network.
Change Using a Web Browser
Change the setting of the UB-R04 using a Web browser. It is suited for some changes in the same network.
After changing the setting of the UB-R04, the TM printer should be reset. If the UB-R04 is set to another
network, the connection will be cut.
Change method
1
Start up the computer of the network.
2
Start up the Web browser and enter the IP Address set for the UB-R04 in the address
bar. The “EpsonNet Config” window is displayed.
Address: http://(IP Address of the UB-R04)/