Epson TM-T20II UB-R04 Technical Reference Guide - Page 35

Start up the Web browser and enter the IP Address for the UB-R04 on the address

Get Epson TM-T20II PDF manuals and user guides View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Chapter 2 Installation Confirming the Operation Confirm that the printer equipped with the UB-R04 wireless LAN interface is connected to the network. There are three confirmation methods. • Confirm with a Web browser. • Confirm with EpsonNet Config. • Confirm with the PING command from the command prompt. 1 Confirm that the network has been running, and start up the network computer. 2 Start up the Web browser and enter the IP Address for the UB-R04 on the address bar. Address: http://(IP Address of the UB-R04)/ 3 The "EpsonNet Config" window is displayed. 2 If the "EpsonNet Config" window is not displayed, print the Dynamic Status Sheet and confirm the setting. When it is not possible to set it, initialize the UB-R04. Then perform setting according to the information from "Printing a Dynamic Status Sheet" on page 31. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Chapter 2
Installation
35
2
Confirming the Operation
Confirm that the printer equipped with the UB-R04 wireless LAN interface is connected to the network.
There are three confirmation methods.
•
Confirm with a Web browser.
•
Confirm with EpsonNet Config.
•
Confirm with the PING command from the command prompt.
1
Confirm that the network has been running, and start up the network computer.
2
Start up the Web browser and enter the IP Address for the UB-R04 on the address
bar.
Address: http://(IP Address of the UB-R04)/
3
The “EpsonNet Config” window is displayed.
If the “EpsonNet Config” window is not displayed, print the Dynamic Status Sheet and confirm
the setting. When it is not possible to set it, initialize the UB-R04. Then perform setting according
to the information from
"Printing a Dynamic Status Sheet" on page 31
.