D-Link DIS-200G Datasheet - Page 83
Example, show ip igmp snooping, Parameters, Default, Command Mode, Command Default Level
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide Example This example shows how to statically add a group for IGMP snooping. Switch# configure terminal Switch(config)# vlan 1 Switch(config-vlan)# ip igmp snooping static-group 225.1.2.3 interface Ethernet 1/0/1 Switch(config-vlan)# 15-5 show ip igmp snooping This command is used to display IGMP snooping information on the Switch. show ip igmp snooping [vlan VLAN-ID] Parameters vlan VLAN-ID (Optional) Specifies the VLAN to be displayed. Default None. Command Mode EXEC Mode or Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display IGMP snooping information for all VLANs where IGMP snooping is enabled. Example This example shows how to display IGMP snooping global state. Switch#show ip igmp snooping IGMP snooping global state: Enabled Switch# This example shows how to display IGMP snooping information on VLAN 2. Switch#show ip igmp snooping vlan 2 IGMP snooping state Querier state Fast Leave state : Enabled : Enabled (Active) : Enabled 79