D-Link DIS-200G Datasheet - Page 159
Default, Command Mode, Command Default Level, Usage Guideline, Example, show rmon alarm, Parameters
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide INDEX log Specifies the index of the alarm entry. The valid range is from 1 to 65535. (Optional) Specifies to generate log message for the notification. trap COMMUNITY owner NAME description STRING (Optional) Specifies to generate SNMP trap messages for the notification. The maximum length is 127. (Optional) Specifies the owner string. The maximum length is 127. (Optional) Specifies a description for the RMON event entry. Enter a text string with a maximum length of 127 characters. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline If the log and not the trap is specified, the created entry will cause a log entry to be generated on an event occurrence. If the trap and not the log is specified, the created entry will cause an SNMP notification to be generated on an event occurrence. If both the log and trap options are specified, the created entry will cause both the log entry and the SNMP notification to be generated on event occurrence. Example This example shows how to configure an event with an index of 13 to generate a log on the occurrence of the event. Switch# configure terminal Switch(config)# rmon event 13 log owner [email protected] description ifInNUcastPkts is too much Switch(config)# 30-5 show rmon alarm This command is used to displays the alarm configuration. show rmon alarm Parameters None. Default None. Command Mode EXEC Mode or Any Configuration Mode. 155