D-Link DIS-200G Datasheet - Page 156
Remote Network MONitoring (RMON) Commands, rmon collection stats, Parameters, Default
View all D-Link DIS-200G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide 30. Remote Network MONitoring (RMON) Commands 30-1 rmon collection stats This command is used to enable RMON statistics on the configured interface. Use the no form of this command to disable the RMON statistics. rmon collection stats INDEX [owner NAME] no rmon collection stats INDEX Parameters INDEX owner NAME Specifies the Remote Network Monitoring (RMON) table index. The range is from 1 to 65535. Specifies the owner string. The maximum length is 127. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 15. Usage Guideline The RMON statistics group entry number is dynamic. Only the interface that is enabled for RMON statistics will have a corresponding entry in the table. Example This example shows how to configure an RMON statistics entry with an index of 65 and the owner name "guest" on Ethernet interface Ethernet 1/0/1. Switch# configure terminal Switch(config)# interface Ethernet 1/0/1 Switch(config-if)# rmon collection stats 65 owner guest Switch(config-if)# 30-2 rmon collection history This command is used to enable RMON MIB history statistics gathering on the configured interface. Use the no form of this command to disable history statistics gathering on the interface. rmon collection history INDEX [owner NAME] [buckets NUM] [interval SECONDS] no rmon collection history INDEX Parameters 152