2003 Polaris Universal ATV Owners Manual - Page 138
2003 Polaris Universal ATV Manual
Page 138 highlights
MAINTENANCE AND LUBRICATION Battery Battery Charging (Sealed Battery) For a refresh charge, follow all instructions carefully. 1. Check the battery voltage with a voltmeter or multimeter. A fully charged battery will register 12.8 V or higher. 2. If the voltage is less than 12.8 volts, recharge the battery. NOTE: When using an automatic charger, refer to the charger manufacturer's instructions for recharging. When using a constant current charger, use the following guidelines for recharging. WARNING An overheated battery could explode, causing severe injury or death. Always watch charging times carefully. Stop charging if the battery becomes very warm to the touch. Allow it to cool before resuming charging. NOTE: Always verify battery condition before and 1-2 hours after the end of charging. State of Charge 100% Voltage Action Charge Time* (Using constant current charger @ standard amps specified on top of battery) 12.8-13.0 volts None, check at 3 mos. from date of manufacture May need slight charge, if no charge given, check in 3 months Needs Charge Needs Charge Needs Charge None required 75%-100% 12.5-12.8 volts 3-6 hours 50%-75% 25%-50% 0%-25% 12.0-12.5 volts 11.5-12.0 volts 11.5 volts or less 5-11 hours At least 13 hours, verify state of charge At least 20 hours 136