2015 Kawasaki Jet Ski Ultra 310X SE Owners Manual - Page 147
2015 Kawasaki Jet Ski Ultra 310X SE Manual
Page 147 highlights
146 MAINTENANCE AND ADJUSTMENTS lower stopper on the bucket should • The against the rear edge of the pump cover. j rest j A. Stopper B. Pump Cover End A. Locknut B. Ball Joint C. Sleeve either position is incorrect, adjust the shift cable. • If Put the shift lever in the "R (Reverse)" position. • Loosen the locknut on the end of the shift link. • back the outer sleeve and take the ball joint • Slide off the ball. the ball joint and reattach it so the lower edge • Turn of the bucket is held above the top of the nozzle allowing the bucket to have 2 ∼ 3 mm (0.08 ∼ 0.12 in.) of play when the shift lever is put in the "F" position. ○The cable end must remain screwed into the rod more than 5 mm after the above adjustment. NOTE
146
MAINTENANCE AND ADJUSTMENTS
j
j
•
The lower stopper on the bucket should rest
against the rear edge of the pump cover.
A. Stopper
B. Pump Cover End
•
If either position is incorrect, adjust the shift cable.
•
Put the shift lever in the “R (Reverse)” position.
•
Loosen the locknut on the end of the shift link.
A. Locknut
B. Ball Joint
C. Sleeve
•
Slide back the outer sleeve and take the ball joint
off the ball.
•
Turn the ball joint and reattach it so the lower edge
of the bucket is held above the top of the nozzle
allowing the bucket to have 2
∼
3 mm (0.08
∼
0.12
in.) of play when the shift lever is put in the “F”
position.
NOTE
○
The cable end must remain screwed into the rod
more than 5 mm after the above adjustment.