2014 Kawasaki KFX50 Owners Manual - Page 120
2014 Kawasaki KFX50 Manual
Page 120 highlights
MAINTENANCE AND ADJUSTMENT 119 Drive Chain Drive chain slack check: Inspect the drive chain while all tires are touching the ground. Check the slack at the position shown in the figure. The normal vertical deflection is approximately 10 ∼ 20 mm (0.4 ∼ 0.8 in.). If the deflection exceeds 20 mm (0.8 in.), adjust the chain slack. Drive chain slack adjustment: 1. Loosen the upper and lower axle holding bolts. j 1. Hub stopper nut 2. Axle holding bolt × 4 2. Turn the adjusting nut to decrease or increase chain slack. A. 10 ∼ 20 mm (0.4 ∼ 0.8 in.).
MAINTENANCE AND ADJUSTMENT
119
j
Drive Chain
Drive chain slack check:
Inspect the drive chain while all tires are touching
the ground. Check the slack at the position shown in
the figure. The normal vertical deflection is approx-
imately 10
∼
20 mm (0.4
∼
0.8 in.). If the deflection
exceeds 20 mm (0.8 in.), adjust the chain slack.
A. 10
∼
20 mm (0.4
∼
0.8 in.).
Drive chain slack adjustment:
1.
Loosen the upper and lower axle holding bolts.
1. Hub stopper nut
2. Axle holding bolt × 4
2.
Turn the adjusting nut to decrease or increase
chain slack.