2014 Kawasaki KFX50 Owners Manual - Page 104
2014 Kawasaki KFX50 Manual
Page 104 highlights
MAINTENANCE AND ADJUSTMENT 103 Oil Level Inspection 1. 2. Place the machine on a level place. Remove the oil filler bolt and check the level. It should be up to the brim of the hole. If the level is low, add oil to raise it to the proper level. Oil Change 1. 2. 3. 4. ○Use the same type and brand of oil that is already in the transmission gear case. 3. Reinstall the oil filler bolt and tighten to specification. Oil filler bolt: 18 Nm (1.8 kgf·m, 13 ft·lb) NOTE Place the machine on a level place. Place a container under the engine. Remove the oil filler bolt and drain plug to drain the oil. Reinstall the drain plug and tighten to Specification. Tightening torque: Drain plug: 18 Nm (1.8 kgf·m, 13 ft·lb) j Tightening torque: 1. Drain plug 5. 1. Oil filler bolt/measurement hole Fill the transmission with oil and install the oil filler bolt.