Marantz NA-11S1 Owner's Manual in English - Page 9

Preparation Operation Connections NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables. Doing so can result in humming or noise. • Do not connect the unit to the PHONO input connectors on the amplifier. Analog connections UNBALANCED Cables used for connections Audio cable (supplied) L L Audio cable R R Remote connector cable Audio cable (sold separately) Balanced audio cable Optical cable BALANCED Coaxial digital cable iPod cable USB cable Cable (sold separately) LAN cable Monaural mini-plug cable Amplifier AUDIO AUDIO IN LR LR LR BALANCED jacks AUDIO BALANCED IN LR L R L R nnBALANCED Jacks The BALANCED jacks on this unit are equipped with XLR connectors that are widely used on professional equipment. Their features are listed below. • The 3 pin construction enables the musical signal to be transmitted as a balanced signal, with little effect from external noise. • The detachable locking mechanism minimizes connector play and enhances connection reliability. The XLR connector for professional use is internally wired in either of the following two systems. This unit employs the USA system. • USA system (w PIN=COLD e PIN=HOT)   $0-%  )05 (/% • European system (w PIN=HOT e PIN=COLD)   )05  $0-% (/% If a product that employs the European system is connected with this unit via a balanced cable, the reproduced signal may be phase-inverted. To correct the inversion, set the "Phase" to "Inverted" at the menu setting (vpage 19). Information 6