Marantz NA-11S1 Owner's Manual in English - Page 11

Connecting to a home network (LAN), Wired LAN, Required system - firmware

Page 11 highlights

Preparation Operation Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio. You can also operate this unit from a computer using the Web control function. • You can update by downloading the latest firmware from the Marantz website. For more information, see "Update" (vpage 12). • See "Setting the network [Network]" (vpage 15) for more information on network setting. Wired LAN Modem Computer Internet Router To WAN side To LAN port To LAN port LAN port/ Ethernet connector Required system nnBroadband Internet connection nnModem A device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available. nnRouter When using this unit, we recommend you use a router equipped with the following functions: • Built-in DHCP server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. nnLAN cable (CAT-5 or greater recommended) • Use only a shielded STP or ScTP LAN cable which is available at retailer. • Some flat type LAN cables are easily affected by noise. We recommend using a normal type cable. • If you have an Internet provider contract for a line on which network settings are made manually, make the settings at "Network connecting (when "DHCP" settings is "Off")" (vpage 15). • With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. • When using this unit with the broadband router's DHCP function enabled, this unit automatically performs the IP address setting and other settings. When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at "Network connecting (when "DHCP" settings is "Off")" (vpage 15). • When setting manually, check the setting contents with the network administrator. NOTE • A contract with an ISP is required to connect to the Internet. • No additional contract is needed if you already have a broadband connection to the Internet. • The types of routers that can be used depend on the ISP. Contact an ISP or a computer shop for details. • Marantz assumes no responsibility whatsoever for any communication errors or troubles resulting from customer's network environment or connected devices. • This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. • Do not connect an Ethernet connector directly to the LAN port/ Ethernet connector on your computer. • To listen to audio streaming, use a router that supports audio streaming. For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop. Information 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

8
Connecting to a home network (LAN)
This unit lets you play via your home network (LAN) music
files stored on a computer and music content such as that
from Internet radio.
You can also operate this unit from a computer using the
Web control function.
You can update by downloading the latest firmware from the
Marantz website.
For more information, see “Update” (
v
page 12
).
See “Setting the network [Network]” (
v
page  15
) for
more information on network setting.
Wired LAN
Internet
To WAN side
Router
To LAN port
To LAN port
LAN port/
Ethernet
connector
Computer
Modem
For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.
Required system
n
Broadband Internet connection
n
Modem
A device that connects to the broadband circuit and
conducts communications on the Internet.
A type that is integrated with a router is also available.
n
Router
When using this unit, we recommend you use a router
equipped with the following functions:
Built-in DHCP server
This function automatically assigns IP addresses on the
LAN.
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a
switching hub with a speed of 100 Mbps or greater.
n
LAN cable (CAT-5 or greater recommended)
Use only a shielded STP or ScTP LAN cable which is
available at retailer.
Some flat type LAN cables are easily affected by noise.
We recommend using a normal type cable.
If you have an Internet provider contract for a line
on
which
network
settings
are
made
manually,
make
the
settings
at
“Network
connecting
(when “DHCP” settings is “Off”)” (
v
page 15
).
With this unit, it is possible to use the DHCP and Auto IP
functions to make the network settings automatically.
When using this unit with the broadband router’s DHCP
function enabled, this unit automatically performs the IP
address setting and other settings.
When
using
this
unit
connected
to
a
network
with
no
DHCP
function,
make
the
settings
for
the
IP
address,
etc.,
at
“Network
connecting
(when “DHCP” settings is “Off”)” (
v
page 15
).
When setting manually, check the setting contents with the
network administrator.
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a
broadband connection to the Internet.
The types of routers that can be used depend on the ISP.
Contact an ISP or a computer shop for details.
Marantz assumes no responsibility whatsoever for any
communication errors or troubles resulting from customer’s
network environment or connected devices.
This unit is not compatible with PPPoE. A PPPoE-compatible
router is required if you have a contract for a type of line set
by PPPoE.
Do not connect an Ethernet connector directly to the LAN
port/ Ethernet connector on your computer.
To listen to audio streaming, use a router that supports audio
streaming.