Marantz NA-11S1 Owner's Manual in English - Page 37

Preparation Operation USB memory device playback You can playback music stored on a USB memory device using this unit. nn USB memory device (vpage 47) Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port. USB memory device 2 Press X (on/standby) to turn on power to the main unit. 3 Press USB to switch the input source to "USB". • For details on selecting the input source using the unit buttons, see "Selecting the input source using the main unit" (vpage 21). 4 Press ui to select the file or folder, then press ENTER or p. 5 Press ui to select the file, then press ENTER, p or 1/3. Playback starts. • If the USB memory device is divided into multiple partitions, only the top partition can be selected. • This unit is compatible with MP3 files conforming to "MPEG1 Audio Layer-3" standards. • Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB connection type HDD of the kind to which an AC adapter can be connected to supply power, use the AC adapter. NOTE • USB memory devices will not work via a USB hub. • It is not possible to connect and use a computer via the USB port of this unit using a USB cable. • Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices. • Files can be read from a USB memory device by connecting the device to this unit. The file reading time varies according to the amount of data saved on the USB memory device. Several minutes may be required to read the maximum permissible number of files and folders. • Note that Marantz will accept no responsibility whatsoever for any problems arising with the data on a USB memory device when using this unit in conjunction with the USB memory device. Removing the USB memory device 1 Press X (on/standby) to set the standby mode. 2 Check that the communication indicator on the USB memory device is not flashing, then pull out the USB memory device. NOTE Do not remove the USB memory device from the unit when the USB memory communication indicator is flashing. Doing so may damage the USB memory device, or may corrupt the files recorded on the USB memory device. Playing repeatedly (Repeat playback) Press REPEAT. Repeat playback starts. • Each time you press REPEAT, the repeat mode is toggled as shown below. Single-track repeat All-track repeat Repeat off (indicator turns off) (Single-track repeat) (All-track repeat) Repeat off (indicator turns off) Only 1 track plays repeatedly. All tracks within the current playback folder are repeated. Normal playback resumes. Playing random order (Random playback) Press RANDOM. The indicator on the display is lighted and all tracks in the current playback folder are randomly played back. nnCanceling random playback Press RANDOM. The indicator on the display turns off. Information 34