Marantz NA-11S1 Owner's Manual in English - Page 59
Resetting the microprocessor
View all Marantz NA-11S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Preparation Operation Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values and all previously stored custom settings will be have to be manually restored. ENTER INPUT 1 Pull the power cord out of the power outlet. 2 Plug the power cord into a power outlet while pressing ENTER and INPUT on the main unit. 3 When the STANDBY indicator lights, release the buttons. "Initialized" appears in the display. If "Initialized" does not display in step 3, start over from step 1. Specifications nn Audio performance • Analog output Channels: Playable frequency range: Playable frequency response: S/N: Dynamic Range: Harmonic Distortion: • Output Level Unbalanced: Balanced: Headphone output: • Digital output Coaxial: Optical: • Digital input Coaxial: Optical: USB (Front) USB (Rear) 2 channels 2 Hz - 96 kHz 2 Hz - 50 kHz (-3 dB) (DSD mode, PCM sampling frequency: 192 kHz) 2 Hz - 20 kHz (PCM sampling frequency: 44.1 kHz) 110 dB (Audible Range) 110 dB (Audible Range) 0.001 % (1 kHz, Audible Range) 2.3 V RMS Stereo 4.6 V RMS Stereo 30 mW/32 Ω/ohms (variable maximum) 0.5 Vp-p -19 dBm 0.5 Vp-p -27 dBm or later USB Type A (USB 2.0 High speed) USB Type B (USB 2.0 High speed) nn Power supply Power supply voltage/frequency: AC 120 V, 60 Hz Power consumption: 50 W Power consumption in standby mode: 0.4 W Power consumption in "Network Control" - "On" mode: 3 W • For purposes of improvement, specifications and design are subject to change without notice. Information 56