Lantronix MatchPort b/g MatchPort b/g - User Guide - Page 78
Command 11h, Get Directions, Get Active Levels, Get Current States, Configurable Pins
View all Lantronix MatchPort b/g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
7: Configurable Pins 0 means dedicated function (e.g., serial flow control, diagnostics) for configurable pin X. Command 11h, Get Directions Send: No parameters Response: 1 parameter Bytes 1-4: Directions Bit X 1 means GPIO X is an output. 0 means it is an input. Command 12h, Get Active Levels Send: No parameters Response: 1 parameter Bytes 1-4: Active levels Bit X 1 means GPIO X is active low (0V when active, 3.3V when inactive). 0 means it is active high (3.3V when active, 0V when inactive). Command 13h, Get Current States Send: No parameters Response: 1 parameter Bytes 1-4: States Bit X 1 means GPIO X is active 0 means it is inactive. Command 19h, Set Directions Send: 2 parameters Bytes 1-4: Mask Bit X 1 means the direction for GPIO X will be updated with the value in the second parameter. 0 means the direction for that GPIO will not change. Bytes 5-8: New Directions Bit X 1 means GPIO X will become an output. 0 means it will become an input. Response: 1 parameter Bytes 1-4: The updated directions MatchPort User Guide 78