Lantronix MatchPort b/g MatchPort b/g - User Guide - Page 34
Trigger Configuration, Apply Settings, Active, Trigger 1
View all Lantronix MatchPort b/g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4: Configuration Using Web-Manager 2. Configure the following fields: Server IP Address Enter the IP address of the mail server. Server Port Enter the port number on the email server. Domain Name Enter the email server's domain name. Unit Name Enter the username used by the MatchPort to send email messages. Note: Do not use spaces in the name. Recipients Recipient 1: Email Enter the email address designated to receive email notifications. Address Recipient 2: Email Enter an additional email address designated to receive email Address notifications. 3. When you are finished, click the OK button. 4. On the main menu, click Apply Settings. Trigger Configuration A trigger event occurs when the unit receives either one or two bytes of a specified sequence on the serial port, or because of a specified combination of conditions on the configurable pins. Set the configurable pins to Active, Inactive, or None. The configurable pins are disabled if they are all set to none. If both the serial sequence and the configurable pins are disabled, the trigger is disabled. To configure the MatchPort's email trigger settings: 1. On the main menu, click Trigger 1, Trigger 2, or Trigger 3 to configure the desired Trigger settings. The Email Trigger Settings page opens. Figure 4-11. Email Trigger Settings MatchPort User Guide 34