Lantronix MatchPort b/g MatchPort b/g - User Guide - Page 29
Connection Settings - TCP, Flush Output Buffer Network to Serial, Connect Protocol
View all Lantronix MatchPort b/g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4: Configuration Using Web-Manager Flush Output Buffer (Network to Serial) With Active Connect Select Yes to clear the output buffer with a connection that is initiated from the device to the network. With Passive Connect Select Yes to clear the output buffer with a connection initiated from the network to the device. At Time of Disconnect Select Yes to clear the output buffer when the network connection to or from the device is disconnected. Connection Settings - TCP To configure a channel's TCP settings: 1. On the main menu, click Connection to open the Connection Settings page for the channel. 2. In the available fields, enter the following information: Connect Protocol Protocol Select TCP from the drop-down list. Figure 4-8. TCP Connection Settings MatchPort User Guide 29