Hoveround Teknique XHD User Manual - Page 53

Appendix B: Fault Codes

Get Hoveround Teknique XHD PDF manuals and user guides View all Hoveround Teknique XHD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Appendix B: Fault Codes The microprocessor checks various features within the controller and will display any fault indication. The controller may prevent the chair from driving if a critical fault condition exists. Refer to the appropriate fault code section for the system used on your Teknique. When there is a fault please follow this procedure: A. Switch off the control system. B. Make sure that all connectors on the chair and the control system are connected securely. Make sure brake release levers are in the drive position. C. Switch on the control system again and try to drive the chair. If the fault occurs again, switch off and do not try to use the wheelchair. Contact Hoveround Support 1-800-96-HOVER (1-800-964-6837) Controllers with system status indicator Tekniques with this controller system use a flashing "System Status Indicator" light (located in the key symbol). When flashing, it indicates a "fault" condition somewhere in the control system (See Figure 11A, Page 54). D82007778 REV N 7/10/12 Chapter 11 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
D82007778 REV N 7/10/12
Chapter 11
53
Appendix B: Fault Codes
The microprocessor checks various features within the controller and will display
any fault indication. The controller may prevent the chair from driving if a critical
fault condition exists. Refer to the appropriate fault code section for the system
used on your Teknique.
Controllers with system status indicator
Tekniques with this controller system use a flashing “System Status Indicator” light
(located in the key symbol). When flashing, it indicates a “fault” condition some-
where in the control system (See Figure 11A, Page 54).
When there is a fault please follow this procedure:
A. Switch off the control system.
B. Make sure that all connectors on the chair and the
control system are connected securely. Make sure
brake release levers are in the drive position.
C. Switch on the control system again and try to drive
the chair. If the fault occurs again, switch off and do
not try to use the wheelchair. Contact Hoveround
Support 1-800-96-HOVER (1-800-964-6837)