Hoveround Teknique XHD User Manual - Page 30

Arm Angle Adjustments, Controller Position Adjustment

Get Hoveround Teknique XHD PDF manuals and user guides View all Hoveround Teknique XHD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Arm Angle Adjustments The seat arms have angle adjustments to suit your driving and comfort requirements. To adjust the arm angle on the seat arms, lift the arm and locate the adjustment bolt near the pivot point. Refer to Figure 4D below. Use the supplied 1/4 inch hex wrench to make the adjustment. Turn the screw clockwise to lower the arm and counter clockwise to raise the arm. Figure 4D Controller Position Adjustment You can adjust the position of the controller by lifting the arm and loosening the socket head cap screw closest to the controller. Slide the controller bracket to a comfortable position and secure the screw. Make sure the screw is clear of the removal key opening (see Figure 9A, page 46) in the bracket before tightening. T-Wrench 3" Max Figure 4E 30 Chapter 4 D82007778 REV N 7/10/12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
30
Chapter 4
D82007778 REV N 7/10/12
Arm Angle Adjustments
The seat arms have angle adjustments to suit your driving and comfort requirements.
To adjust the arm angle on the seat arms, lift the arm and locate the adjustment
bolt near the pivot point. Refer to Figure 4D below.
Use the supplied 1/4 inch hex wrench to make the adjustment. Turn the screw
clockwise to lower the arm and counter clockwise to raise the arm.
Figure 4D
Controller Position Adjustment
You can adjust the position of the controller by lifting the arm and loosening the
socket head cap screw closest to the controller.
Slide the controller bracket to a comfortable position and secure the screw.
Make
sure the screw is clear of the removal key opening (see Figure 9A, page 46) in the
bracket before tightening.
Figure 4E
3” Max
T-Wrench