Hoveround Teknique XHD User Manual - Page 46
Disassembling and Reassembling Your Teknique
View all Hoveround Teknique XHD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 9 Disassembling and Reassembling Your Teknique Controller Removal/Replacement Removal 1. Check that vehicle power is OFF. 2. Lift the arm and loosen the sockethead cap screw closest to the controller. Use the 1/4 inch hex wrench supplied with your chair (See Figure 9A below). 3. Slide the controller bracket forward until it hits the keyhole. (See Figure 9B below). Remove bracket from arm and place on footrest or other safe location. Unlock cable from seat or frame (if so equipped). Cap Screw Keyhole Figure 9A Figure 9B Replacement 1. Loosen forward socket head cap screw. 2. Position keyhole portion of bracket over screw and slide into place. 3. Position controller in a comfortable position and secure screw. 4. Refasten controller cable (if so equipped). 46 Chapter 9 D82007778 REV N 7/10/12