Hoveround Teknique XHD User Manual - Page 33

Adjusting The Seat Position

Get Hoveround Teknique XHD PDF manuals and user guides View all Hoveround Teknique XHD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Adjusting The Seat Position Seats with side mounting brackets can be adjusted forward and rearward and up and down. To raise or lower the seat 1. Locate the hex head or socket head bolts on the side brackets below the seat. Loosen the rear bolts and remove the front bolts (See Figure 4J, below). 2. Slide the seat back and reposition the rear bolts in the desired slots. Line up the front holes and reinstall the front bolts. Tighten all bolts securely. Rear Bolt Front Bolt Figure 4J - Seats With Side Rail Mounting To move the seat forward or backward 1. Determine the amount the seat needs to be moved. 2. Remove the controller from the arm (See page 46). 3. Remove the front bolts and loosen the rear bolts. Slide the seat back until the slots are cleared and remove the seat. 4. Locate the four bolts that hold the seat brackets to the base. 5. Remove the bolts and reposition the brackets by the desired amount. Align the bracket holes to the frame holes. 6. Reinstall the seat bracket bolts. D82007778 REV N 7/10/12 Chapter 4 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
D82007778 REV N 7/10/12
Chapter 4
33
Adjusting The Seat Position
Seats with side mounting brackets can be adjusted forward and rearward and up
and down.
To raise or lower the seat
1.
Locate the hex head or socket head bolts on the side brackets below the
seat. Loosen the rear bolts and remove the front bolts (See Figure 4J, below).
2.
Slide the seat back and reposition the rear bolts in the desired slots. Line
up the front holes and reinstall the front bolts. Tighten all bolts securely.
Figure 4J - Seats With Side Rail Mounting
To move the seat forward or backward
1.
Determine the amount the seat needs to be moved.
2.
Remove the controller from the arm (See page 46).
3.
Remove the front bolts and loosen the rear bolts. Slide the seat back until
the slots are cleared and remove the seat.
4.
Locate the four bolts that hold the seat brackets to the base.
5.
Remove the bolts and reposition the brackets by the desired amount.
Align the bracket holes to the frame holes.
6.
Reinstall the seat bracket bolts.
Rear Bolt
Front Bolt