Hoveround Teknique XHD User Manual - Page 38

Flip-Up Style Footrest FWD, XHD and HD-6, models only

Get Hoveround Teknique XHD PDF manuals and user guides View all Hoveround Teknique XHD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Chapter 6 Footrests and Legrests When your thighs rest on the seat cushion, your feet should comfortably rest on the plate(s) of the footrest/legrests. You can make several adjustments to maximize safety and comfort. In addition, a bracket mounted to the underside front of the seat accommodates swing-away legrests. Flip-Up Style Footrest (FWD, XHD and HD-6 models only) 1. You can adjust the flip-up style footrest angle from 0 to 15 degrees. To adjust, locate the set screws in each corner of the frame bracket and move them in or out until you have found a comfortable foot position. Adjust screws using the supplied 1/4" hex wrench. To prevent binding, make sure the heads of the screws touch the footrest at the same time (See Figure 6A below). Figure 6A - Footrest Adjustment Screws 2. Set footrest tension by tightening or loosening the right hand pivot bolt with the nylon washer. 3. Change the footplate height by using the upper or lower mounting holes on the sides of the anti-tip brackets. 38 Chapter 6 D82007778 REV N 7/10/12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
38
Chapter 6
D82007778 REV N 7/10/12
Chapter 6
Footrests and Legrests
When your thighs rest on the seat cushion, your feet should comfortably rest on
the plate(s) of the footrest/legrests. You can make several adjustments to maximize
safety and comfort. In addition, a bracket mounted to the underside front of the
seat accommodates swing-away legrests.
Flip-Up Style Footrest (FWD, XHD and HD-6
models only)
1.
You can adjust the flip-up style footrest angle from 0 to 15 degrees. To adjust,
locate the set screws in each corner of the frame bracket and move them in or
out until you have found a comfortable foot position. Adjust screws using the
supplied 1/4” hex wrench. To prevent binding, make sure the heads of the
screws touch the footrest at the same time (See Figure 6A below).
Figure 6A - Footrest Adjustment Screws
2.
Set footrest tension by tightening or loosening the right hand pivot bolt with
the nylon washer.
3.
Change the footplate height by using the upper or lower mounting holes on
the sides of the anti-tip brackets.