Hoveround Teknique XHD User Manual - Page 35
Seatback Adjustment for 22 and 24 Reclining Back Seat
View all Hoveround Teknique XHD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Seatback Adjustment for 22" and 24" Reclining Back Seat - The 22 and 24 inch seats have a heavy duty, dual hinge mechanism that allows you to adjust the seatback from the right or left side. The seatback release has two modes - one to recline or raise the seatback and one to release the seatback to allow it to fold forward for storage or transport. The seat can be reclined or folded from the upright back position only. Adjusting The Recline - To recline the seat from the straight up position (see Figure 4L below), locate the release lever on the lower right or left rear of the seat. Pull up on the lever to lock the seatback in position (see Figure 4M below). Make sure the release lever is locked in position before applying weight to back or arms. If you wish to raise the seatback pull up on the lever and move the seatback to the desired position. The seatback will stop when it is straight up. Folding The Seatback Down - Starting in the straight-up position, push the lever down and fold the seat forward (see Figure 4N below). To raise the seatback from the folded position, lift the seatback until it locks. Fold Down Recline Figure 4L - Straight Up Figure 4M - Recline D82007778 REV N 7/10/12 Figure 4N - Fold Down Chapter 4 35