Epson Home Cinema 2100 Users Guide - Page 109
Event ID code, Cause and solution, Adjust Image Quality, try connecting again.
View all Epson Home Cinema 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Event ID code 0020 0026 0032 0036 0037 0021 0022 0027 0028 0029 0030 0031 0035 0023 0024 0025 0038 0042 0041 0043 0432 0435 0433 Cause and solution Screen Mirroring communication error occurred. Turn the projector off and then on again, or restart the network software. Screen Mirroring did not start. Turn the projector off and then on again. Unstable Screen Mirroring communication. Check the network communication status, wait a few moments, and try connecting to the network again. Connection failed. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen Mirroring standby screen or at the bottom right of the projected image. If this does not solve the problem, restart the projector and connected devices, then check the connection settings. Wireless LAN system mismatch. Check the wireless LAN settings for the mobile device and projector, then try connecting again. Connection failed. Delete the recorded projector information on your computer and try connecting again. The video format is not supported. Change the resolution of the mobile device or select a different Adjust Image Quality setting, then try connecting again. The network software did not start. Turn the projector off and then on again. Cannot display the transferred images. Restart the network software. 109