Dell Chromebook 5190 Owners Manual - Page 32

Installing display assembly

Get Dell Chromebook 5190 PDF manuals and user guides View all Dell Chromebook 5190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

h. Remove the 6 (M2.5x5) display hinge bracket screws that secure the display assembly to the system [1]. i. Lift the display assembly away from the system [2]. Installing display assembly Steps 1. Place the chassis on the edge of a plane surface. 2. Align the display assembly with the screw holders on the system. 3. Replace the 6 display hinge bracket screws to secure the display assembly to the system. 4. Lift the system and close the display. 5. Connect the eDP cable to the connector on the system board. 6. Affix the adhesive tape to secure the eDP cable to the system. 7. Place the eDP metal bracket to secure the eDP cable. 8. Replace the single screw to secure the eDP bracket to the system. 9. Install the: a. battery b. base cover c. microSD card 10. Follow the procedure in After working inside your computer. 32 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
h.
Remove the 6 (M2.5x5) display hinge bracket screws that secure the display assembly to the system [1].
i.
Lift the display assembly away from the system [2].
Installing display assembly
Steps
1.
Place the chassis on the edge of a plane surface.
2.
Align the display assembly with the screw holders on the system.
3.
Replace the 6 display hinge bracket screws to secure the display assembly to the system.
4.
Lift the system and close the display.
5.
Connect the eDP cable to the connector on the system board.
6.
Affix the adhesive tape to secure the eDP cable to the system.
7.
Place the eDP metal bracket to secure the eDP cable.
8.
Replace the single screw to secure the eDP bracket to the system.
9.
Install the:
a.
battery
b.
base cover
c.
microSD card
10.
Follow the procedure in
After working inside your computer
.
32
Removing and installing components