Dell Chromebook 5190 Owners Manual - Page 27

System board, Removing system board

Get Dell Chromebook 5190 PDF manuals and user guides View all Dell Chromebook 5190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

System board Removing system board Steps 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. microSD card b. base cover c. battery d. WLAN 3. To remove the system board: a. Lift the latch and, disconnect the 2 Input/Output cables from the connector on the system board [1]. b. Lift the latch and, disconnect the touchpad cable from the connector on the system board [2]. c. Release the tabs and, disconnect the keyboard cable from the connector on the system board [3]. d. Disconnect speaker cable from the connector on the system board [4]. e. Remove the single (M2x4) screw that secures the eDP bracket to the system board [1]. f. Remove the eDP bracket away from the system [2]. g. Peel the adhesive tape that secures the eDP cable to the system board [3]. h. Lift the latch and, disconnect the eDP cable from the connector on the system board [4]. i. Peel the adhesive tape that secures the cable to the system [5]. Removing and installing components 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
System board
Removing system board
Steps
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
microSD card
b.
base cover
c.
battery
d.
WLAN
3.
To remove the system board:
a.
Lift the latch and, disconnect the 2 Input/Output cables from the connector on the system board [1].
b.
Lift the latch and, disconnect the touchpad cable from the connector on the system board [2].
c.
Release the tabs and, disconnect the keyboard cable from the connector on the system board [3].
d.
Disconnect speaker cable from the connector on the system board [4].
e.
Remove the single (M2x4) screw that secures the eDP bracket to the system board [1].
f.
Remove the eDP bracket away from the system [2].
g.
Peel the adhesive tape that secures the eDP cable to the system board [3].
h.
Lift the latch and, disconnect the eDP cable from the connector on the system board [4].
i.
Peel the adhesive tape that secures the cable to the system [5].
Removing and installing components
27