D-Link DBG-2000 Product Manual 1 - Page 66
Close, Field, Description, Interface, Direction, Version, Authentication, Active, Actions, Delete
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Save Close Click Save to save your settings. Click Close to revert to the previous settings. DBG-2000 User Guide RIP Configuration Dynamic routing using the Routing Information Protocol (RIP) is an Interior Gateway Protocol (IGP) common in LAN. With RIP, the cloud gateway can exchange routing information with other supported gateways in the LAN and allow for dynamic adjustment of routing tables to adapt to modifications in the LAN without interrupting traffic flow. The fields displayed on the page are as follows: Field Interface Direction Version Authentication Active Actions Description It displays the interface on which the RIP is configured. It displays in which direction the RIP packets need to be exchanged. It displays the RIP version supported by the routing devices in the selected interface. It displays whether the authentication is enabled or disabled for RIP-2M. You can enable or disable the configured RIP. Note: The enable and disable fields are available only if the "Use profile configuration" field is disabled. You can edit or delete the configured RIP. Note: This field is available only if the "Use profile configuration" field is disabled. Click Add to add a new entry to the list. This opens the Add RIP configuration page. To delete multiple entries, select the corresponding checkboxes present in the first column of the table, and click Delete. The fields available on the Add RIP configuration page are as follows: 66