D-Link DBG-2000 Product Manual 1 - Page 128
Blink LEDs, Reboot device
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
DBG-2000 User Guide IP address/FQDN Traceroute Result Enter the IP address or FQDN. Click Traceroute to display all the routers present between the destination IP address and this gateway. This section displays the results of the Traceroute operation. Others Blink LEDs The front panel of the cloud gateway consists of two LEDs that indicate the gateway's power and the cloud status of the gateway. The Blink LEDs feature helps you check if the connection has been established between the gateway and the cloud. After you click the Start button, the Power and Cloud LEDs on the gateway start blinking in the Red color, indicating that the connection is available between the Cloud and the gateway. Power Supply LED The power LED indicates the power status of the gateway. LED Power Color Orange/Green/Red Status Solid Orange Blinking Orange Solid Green Solid Red Blinking Red Off Description Power-on is in progress. Firmware upgrade in progress. Power-on completed. Factory reset in progress. The Start button of Blink LEDs is clicked. The device is power-off. Cloud Status LED The cloud status LED indicates the Nuclias cloud connection status of the device. LED Cloud Color Orange/Green/Red Status Solid Orange Solid Green Solid Red Blinking Red Off Description Establishing Cloud connection Established Cloud connection No cloud connection established The Start button of Blink LEDs is clicked. The device is power-off. Reboot device Click the Reboot button to perform the power cycle. 128