D-Link DBG-2000 Product Manual 1 - Page 121
Remote Networks
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
DBG-2000 User Guide The fields available on the Add OpenVPN server policy page are as follows: Field Policy name Policy Scope Local authentication Apply policy to IP network Subnet mask IP address Port ICMP Save Cancel Description Enter a name for the server policy. Select the policy, whether to permit or deny access to the specific IP address or IP network. Select the scope from the drop-down menu. It is either Global or Local authentication. If Local authentication is selected as the Scope, specify the user name (client) to which this policy is to be applied. Select an accessible IP address or IP network to which the policy is applied. Enter the IP network to which the OpenVPN policy needs to be applied. Enter the subnet mask for the above IP network. Enter the IP address to which the OpenVPN policy needs to be applied. Enter the range of port numbers to which the policy will be applied. Enable it to support ICMP traffic. Click Save to save your settings. Click Cancel to revert to the previous settings. Remote Networks This section displays a list of configured remote networks. The configured IP addresses can remotely access the server through an OpenVPN tunnel. The fields displayed on the Remote networks table are as follows: Field Common name Remote networks Subnet mask Actions Description It displays the name of the remote network. It displays the IP address of the remote networks. It displays the subnet mask for the IP address of the remote network. 121