D-Link DBG-2000 Product Manual 1 - Page 114
Adding a PPTP Client
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
DBG-2000 User Guide IP address Status Active Actions It displays the IP address of the client. It displays the status of the client, whether it is connected or not. You can enable or disable the client. You can edit or delete the selected client from the list. Click Add to add a new entry to the list. This opens the Add PPTP/L2TP client page. To delete an entry or multiple entries, select the corresponding checkboxes, and click Delete. Adding a PPTP Client The fields available on the Add PPTP/L2TP client page are as follows: Field Server type Name VPN server Tunnel type Remote network Remote netmask User name Description Select the server type as PPTP. Enter the name. Enter the IP address or domain name of the PPTP server you want to connect to. Select the tunnel type. Full tunnel: If this is selected, it will access the Internet and the LAN host connected to the server device through the PPTP server once the connection is established, Split tunnel: If this is selected, it will access only the selected remote network. Enter the remote network address. This address is local for the PPTP Server. Enter the remote network subnet mask. Enter the user name to connect to the server. 114