D-Link DBG-2000 Product Manual 1 - Page 65
Destination port, Local Gateway, Active, Actions, Delete, Field, Description, Local gateway,
View all D-Link DBG-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
DBG-2000 User Guide Destination port Local Gateway Active Actions It displays a destination port for which the policy route will be applicable. It displays the WAN interface. You can enable or disable the selected policy route. Note: The enable and disable options are available only if the "Use profile configuration" field is disabled. You can edit or delete the route. Note: This field is available only if the "Use profile configuration" field is disabled. To delete multiple entries at once, select the checkboxes of the policy route you want to delete, and click Delete. Click Add to add more entries. This opens the Add policy route page. The fields available on the Add policy route page are as follows: Field Name Local gateway Protocol Source network Source port Destination network Destination port Description Enter the name of the policy route. Select the WAN interface. Select one of the protocols that are commonly placed in the transport layers of the Internet protocol suite. Enter an IP address, a range of IP addresses, or Any as the source network. A port is a communication endpoint. Ports are identified for each protocol and address combination by 16-bit unsigned numbers, commonly known as the port number. The most common protocols that use port numbers are the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP). Here, the Source port is an integer in the range of 165535 initiated from a specific application on the source IP. Enter a source port number. Enter an IP address, a range of IP addresses, or Any as the destination network. Destination Port is an integer in the range of 1-65535 destined to a specific application on destination IP. Enter the destination port number. 65