Campbell Scientific AVW200 AVW200-series Vibrating Wire Interfaces - Page 34
Deployment Tab, 5.2.1 Communications
View all Campbell Scientific AVW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
AVW200-series 2-Channel Vibrating Wire Spectrum Analyzer Modules FIGURE 5-1. Opening Page in DevConfig 5. Select the Serial Port matching the COM port on your computer in which the AVW200 is connected. 6. Press the Connect button. The device may take up to 60 seconds to respond to DevConfig, and for the current settings to be loaded into the Settings Editor. 5.2 Deployment Tab 5.2.1 Communications The Deployment Communications Editor is the active tab when you are first connected (see FIGURE 5-2). These settings are used for RF communications. 26
AVW200-series 2-Channel Vibrating Wire Spectrum Analyzer Modules
FIGURE 5-1.
Opening Page in DevConfig
5.
Select the Serial Port matching the COM port on your computer in which
the AVW200 is connected.
6.
Press the Connect button. The device may take up to 60 seconds to
respond to DevConfig, and for the current settings to be loaded into the
Settings Editor.
5.2
Deployment Tab
5.2.1 Communications
The Deployment Communications Editor is the active tab when you are first
connected (see FIGURE 5-2).
These settings are used for RF communications.
26