Campbell Scientific AVW200 AVW200-series Vibrating Wire Interfaces - Page 106
I.2 Connections
View all Campbell Scientific AVW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Appendix I. Using MD485 Multidrop Modems with AVW200 Interfaces I.2 Connections The point-to-point configuration is the simplest MD485-to-AVW200 network. In this configuration, two MD485s are required (see FIGURE I-2). The point-to-multipoint configuration uses several AVW200s. In this configuration, you need one MD485 to connect with the datalogger and another MD485 for each AVW200 in the network (see FIGURE I-3). Datalogger MD485 MD485 AVW200 18663 Null Modem Cable CABLE2TP-L Cable FIGURE I-2. Point-to-Point MD485-to-AVW200 Network Datalogger MD485 MD485 AVW200 with a unique PakBus Address MD485 AVW200 with a unique PakBus Address 18663 Null Modem Cable CABLE2TP-L Cable FIGURE I-3. Point-to-Multipoint MD485-to-AVW200 Network I-2
Appendix I.
Using MD485 Multidrop Modems with AVW200 Interfaces
I.2 Connections
The point-to-point configuration is the simplest MD485-to-AVW200 network.
In this configuration, two MD485s are required (see FIGURE I-2).
The point-to-multipoint configuration uses several AVW200s.
In this
configuration, you need one MD485 to connect with the datalogger and another
MD485 for each AVW200 in the network (see FIGURE I-3).
18663 Null Modem Cable
CABLE2TP-L Cable
Datalogger
MD485
AVW200
MD485
FIGURE I-2.
Point-to-Point MD485-to-AVW200 Network
18663 Null Modem Cable
CABLE2TP-L Cable
AVW200 with a unique
PakBus Address
Datalogger
MD485
MD485
MD485
AVW200 with a unique
PakBus Address
FIGURE I-3.
Point-to-Multipoint MD485-to-AVW200 Network
I-2