Adaptec 5405 User Guide - Page 72
Create, Advanced settings, RAID Volume, Express, Configuration: The Easy Way
UPC - 760884155585
View all Adaptec 5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 6: Modifying Your Direct Attached Storage ● 72 To build a RAID Volume: 1 Create two or more logical drives that meet the requirements listed at the beginning of this section, and wait for them to build and initialize. For instructions, see Express Configuration: The Easy Way on page 34 or Custom Configuration (Advanced) on page 37. This example shows two RAID 5 logical drives, which can be used to build a RAID volume. 2 On the toolbar, click Create. 3 When the configuration wizard opens, select Custom configuration..., then click Next. 4 Click Advanced settings, select RAID Volume, then click Next. 5 In the Logical Devices panel, select the logical drives you want to use in the RAID Volume. Adaptec Storage Manager prompts you to select the correct number of logical drives. Number of disk drives required 6 Modify the Advanced Settings, if required. (See Fine-tuning Logical Drives on page 63 for more information.) 7 Click Next to review the RAID Volume settings. To make changes, click Back. This example shows one RAID Volume ready to be created.