Adaptec 5405 User Guide - Page 47

Chapter 4: Exploring Adaptec Storage Manager ● 47 What do the icons in the Physical Devices View mean? Icon Description Ready disk drive, not part of any logical drive Disk drive with some space allocated to a logical drive, and some space available Disk drive with no free space Failed disk drive Healthy global or dedicated hot spare protecting at least one logical drive (See Creating and Managing Hot Spares on page 54 for more information.) Hot spare with error (see page 55 for more information) Hot spare being built into logical drive after disk drive failure Hot spare built into logical drive after disk drive failure Ready Solid State Drive (SSD), not part of any logical drive or MaxIQ pool Solid State Drive assigned to MaxIQ pool Controller Enclosure Management Device (represents an enclosure connected to your controller) The Logical Devices View When you select a controller in the Enterprise View, information about the logical drives and arrays associated with that controller appear in the Logical Devices View. (A logical drive is a group of physical disk drives that your operating system recognizes as a single drive. For more information, see Understanding Logical Drives on page 59.) Controller 1 is connected to... ...28 disk drives (some not shown here)... ...from which two logical drives have been created. The RAID level of a logical drive is indicated by the number inside the logical drive's icon. For instance, the logical drive shown at right has RAID 1. Logical drives protected by hot spares have plus signs (+) beside them, as shown at right. Hold your cursor over any logical drive to see its name, status, and size. You can also click the arrow, shown at right, to view this same information for all the logical drives at once.