Adaptec 5405 User Guide - Page 65
Changing the Initialize Priority, Actions, Con read cache, Enabled, Disabled, Build, Clear
UPC - 760884155585
View all Adaptec 5405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 6: Modifying Your Direct Attached Storage ● 65 To quickly change the read cache setting: 1 Click the logical drive you want. 2 In the menu bar, select Actions, click Configure read cache, then select Enabled or Disabled as required. The read cache setting is changed. Changing the Initialize Priority The Initialize Priority setting determines the priority for the initialization of the logical drive. The default setting is High, which means that the logical drive is initialized as quickly as possible. Changing the Initialize Method The Initialize Method setting determines how a logical drive is initialized (prepared for reading and writing), and how long initialization will take. The settings are presented in order of slowest to fastest method. ● Build-(slowest) For RAID 1 logical drives, data is copied from the primary drive to the mirror drive; for RAID 5 logical drives, parity is computed and written. Build is the default setting for most logical drives (see Quick method below). Adaptec Storage Manager performs build initializations in the background; you can use the logical drive immediately. ● Clear-Every block in the logical drive is overwritten, removing all existing data. You can't use the logical drive until the initialization is complete. ● Quick-(fastest) The logical drive is made available immediately. Quick is the default setting for RAID 1, RAID 1EE, and RAID 10 logical drives.