Adaptec 2906 User Guide - Page 36

Common Error Messages 4 Click Have Disk, then click Browse. 5 Look in the \drivers/storage directory of the CD-ROM and select the model of your SCSI card, or go to a:\win95\98 on the Adaptec EZ-SCSI Setup Diskette. How can I check the status of a resource (for example, IRQ, Memory, I/O)? 1 Click Start, point to Settings, then click Control Panel. 2 Double-click the System icon. 3 Click the Device Manager tab. 4 Click Computer, and then click Properties. 5 Open the View Resources tab and click the option button for the type of resource you want to check. The setting and the hardware using the setting displays. I If a specific resource is not listed, the resource is not used by a device. I If a resource is listed more than once, the resource is used by more than one device. I If a resource is used by an unknown device, the resource is used but the device using the resource cannot be detected. How do I use the Hardware Conflict Troubleshooter in Windows 95/98? 1 Click Start, then click Help. 2 From the Contents tab, double-click Troubleshooting. 3 Double-click If you have a hardware conflict. 4 Follow the step-by-step instructions in the Windows Help window. Common Error Messages "Device connected, but not ready" The SCSI card received no answer when it requested data from an installed SCSI device. I Make sure the drive is set to spin up when the power is switched on. (See the documentation for the device.) If you still 27