Adaptec 2906 User Guide - Page 11
Installing the SCSI Card 2906 - pci
UPC - 760884150795
View all Adaptec 2906 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Kit Contents Installing the SCSI Card 2906 Note: If you are installing the SCSI Card 2906 into a Macintosh computer, you must install the driver first. See Installing Drivers - Macintosh on page 19. Take these precautions before you begin installing your SCSI Card 2906: I Turn off the computer and disconnect the power cord. I Ground yourself by touching the chassis. I Always handle the SCSI card by its edges or metal bracket. Do not touch the gold connector or any of the components on the card. To install the SCSI Card 2906 1 After turning off the computer and disconnecting the power cord, open the computer cabinet. Refer to the computer's documentation for instructions. 2 Find an unused PCI expansion slot (typically white or ivory) in the computer. Unscrew the expansion slot cover screw and remove the slot cover to provide an opening, as shown. Save the slot cover screw for use in Step 5. Expansion slot cover PCI expansion slots 2