2010 Ducati Superbike 1198 R Corse Owners Manual - Page 97
2010 Ducati Superbike 1198 R Corse Manual
Page 97 highlights
E Replacing the high and low beam bulbs Before replacing a burnt-out bulb, make sure that the new bulb complies with the voltage and wattage specified in the "Wiring diagram", page 119. Always test the new bulb before refitting any parts you have removed. Shown in fig. 81 are the locations of the low beam bulb (LO), high beam bulb (HI) and parking light bulb (1). 1 LO HI Headlight To gain access to the left-hand bulb, remove the cover (2) by pressing the lever (A). Rotate the locking ring nut (3) of the upper bulb body anticlockwise and extract the burnt-out bulb. Replace with a bulb of equal rating. On refitting, rotate the locking ring nut (3) clockwise to secure the bulb in place. The right-hand bulb is replaced in the same way. fig. 81 A 3 2 fig. 82 96