2010 Ducati Superbike 1198 R Corse Owners Manual - Page 66
2010 Ducati Superbike 1198 R Corse Manual
Page 66 highlights
STANDARD factory setting is as follows: Compression: 8 clicks; Rebound: 10 clicks. Spring preload: starting with the adjuster screwed FULLY OUT, screw it in clockwise by 8 turns; corresponding to an actual preload of 8 mm. To change the preload of the spring inside each fork leg, turn the hex. adjuster (2, fig. 47) with a 22 mm hexagon wrench. 3 E Important Adjust both fork legs to same settings. fig. 48 65
65
E
STANDARD factory setting is as follows:
Compression: 8 clicks;
Rebound: 10 clicks.
Spring preload: starting with the adjuster screwed FULLY
OUT, screw it in clockwise by 8 turns; corresponding to an
actual preload of 8 mm.
To change the preload of the spring inside each fork leg, turn
the hex. adjuster (2, fig. 47) with a 22 mm hexagon wrench.
Important
Adjust both fork legs to same settings.
3
fig. 48