2010 Ducati Superbike 1198 R Corse Owners Manual - Page 31

E Displays the data saved using the LAP function: lap time, MAX speed and MAX rpm. To display the saved lap times, go into the menu and select the "LAP MEM" page. Holding switch (1, fig. 10) pressed in position B "▼" for 3 seconds in this menu page gives access to the "1st lap" view mode. The display will show the lap number, lap time, MAX speed and the MAX rpm reached for the lap in question. Press switch (1, fig. 10) in position B "▼" repeatedly to scroll through the 30 laps stored until returning to the 1st lap. If you press switch (1, fig. 10) in position B "▼" for 3 seconds while the saved times are displayed, the instrument panel immediately resets all the saved times; in this case, if the LAP function was active, it is switched off automatically. The MAX speed saved is the maximum speed indicated on the instrument panel in Lap function. If MAX speed reading exceeds 299 Km/h (186 mph) while the information is stored, speed reading is displayed (example: 316 Km/h). If the memory is empty, the display shows the 30 times, with the lap timer reading "00.00.00", MAX RPM = 0 and MAX speed = 0. If the engine reached one of the two thresholds before the limiter or the limiter threshold during a lap, the corresponding lights (10, fig. 3) come on while viewing stored lap times. Stored data display (LAP Memory) B A B x 19 B A B= = ON ON x 33 sec B for secs. Azzeramento dei Resets lap times tempi in memoria in memory A B x 19 B A fig. 23 30