2010 Ducati Superbike 1198 R Corse Owners Manual - Page 100
2010 Ducati Superbike 1198 R Corse Manual
Page 100 highlights
Rear turn indicators (fig. 84) To change the rear turn indicator bulbs, rotate the indicator body (1) through one quarter of a turn so that the lens is up and extract indicator body from the indicator light unit. The bulb has a bayonet-type end fitting: to remove it, push it in and turn it counter-clockwise. Push in the new bulb and turn it clockwise until it clicks into place. Refit the indicator body (3) to its support and rotate it by a quarter of a turn. E 1 2 Number plate light (fig. 85) fig. 84 To access the number plate light bulb, unscrew the screw (3) securing the cover (4). Remove the bulb and replace it. 4 3 fig. 85 99
99
E
Rear turn indicators
(fig. 84)
To change the rear turn indicator bulbs, rotate the indicator
body (1) through one quarter of a turn so that the lens is up
and extract indicator body from the indicator light unit.
The bulb has a bayonet-type end fitting: to remove it, push it
in and turn it counter-clockwise. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the indicator
body (3) to its support and rotate it by a quarter of a turn.
Number plate light
(fig. 85)
To access the number plate light bulb, unscrew the screw (3)
securing the cover (4). Remove the bulb and replace it.
4
3
fig. 85
1
2
fig. 84