2010 Ducati Superbike 1198 R Corse Owners Manual - Page 18
2010 Ducati Superbike 1198 R Corse Manual
Page 18 highlights
Upon Key-On, the instrument panel always displays the following information (and any functions activated previously are deactivated, apart from the Traction Control, when active): ODOMETER AIR TEMPERATURE CLOCK SPEED COOLANT TEMPERATURE ENGINE RPM With the switch (1, fig. 10) at position B "▼", the ODOMETER READOUT (TOT) will cycle through the following functions: TRIP A TRIP B TRIP FUEL (only if active) DTC (available only if Traction Control is fitted and active) until cycling back to the ODOMETER (TOT) function. Pressing switch (1, fig. 10) in position A "▲" gives access to the MENU and the following functions are displayed one after another: ERROR (only if at least one error is present) BATT RPM LAP (OFF or ON) LAP MEM DDA (OFF or ON) Erase DDA DTC OFF/ON (active only if Traction Control is fitted) DTC SETUP (active only if DTC has been activated) E A 1 B TIME Set CODE (only if active) fig. 10 This menu is active only if the speed of the motorcycle is less than 20 km/h. If this menu is open and the speed of the motorcycle exceeds 20 km/h, the instrument panel automatically exits the menu and returns to the initial display. It is possible to exit the menu at any time, however, by pressing switch (1, fig. 10) in position A "▲" for 3 seconds. Important 17