2010 Ducati Superbike 1198 R Corse Owners Manual - Page 36
2010 Ducati Superbike 1198 R Corse Manual
Page 36 highlights
DTC (Ducati Traction Control) setting function This function serves to set the sensitivity level for the DTC (Ducati Traction Control). To set the Traction Control sensitivity level, with the motorcycle stationary, enter the "Setup DTC" menu page. This page only appears in the menu once the Traction Control ECU has been activated (DTC ON). The Traction Control intervention level setting (L.1...L.8) is indicated on the right-hand side of the display; the intervention levels range from "1" to "8"; the higher the number, the greater the intervention of the Traction Control system (see following paragraph). Within this menu page, press switch (1, fig. 10) in position B "▼" for 3 seconds to access the level setting function. page 1: the display will show "Setup LEV. 1". If you wish to set this level, press switch (1, fig. 10) in position B "▼" for 3 seconds; the instrument panel will automatically quit this page and return to the initial display, with the level setting indicated on the right-hand side. If instead you wish to set the next highest level, press switch (1, fig. 10) in position B "▼". Only Soloif se active attivo E ON 3 BB == ON x for 3 sec. secs. A B B= =ON ON x 33sec. for sec. B A B= = ON ON B for sec. x 33sec. B A B B B= = ON ON x 33sec. for sec. fig. 27 35