2006 Ducati Superbike 749 Dark Owners Manual - Page 133

E Seat/fuel tank adjustment 749S (single-seater) The complete seat-fuel tank-tail guard assembly can be adjusted on the single-seater version by sliding it forward and rearward along the rear subframe (1) axis. This provides a 20-mm adjustment range for the seat (2) to meet rider's preferences. Adjust as follows: Release and remove the side screws (3) and remove the side grab handles (4). Slacken the screws (5) and move the seat-fuel tank assembly forward or rearward. The three holes (6) in the subframe (1) allow three different positions. Match the seat hole with the subframe hole that determines the desired seat position. When finished, torque the screws (5) to 10 Nm. A stud (7) fixed in the centre of the tail guard slides in a slot (8) fitted with an "H" rubber (9). Position the side grab handles and tighten the side screws (3) to 10 Nm. 2 6 1 fig. 30 DUCATI 7 9 8 5 4 3 fig. 31 36